Sell all kinds: Waterproofing, membrane, PVC waterstop, Bonding agent, epoxy coating, slef levelling, epoxy mortar, polyurethane sealant, protective coating, polyurethane anda efoxy injection, grouting non shrink, floor hardner, efoxy flooring, concrete repair, repair for expansion joints & construction joints.
SCG 200 – FLEXIBLE CEMENTITIOUS WATERPROOFING :
SCG 200 is a two component acrylic polymer modified cementitious coating which is supplied in easy to use kits. By varying the mix proportions, SCG 200 can be applied simply by stiff brush, roller and trowel to obtain the desired texture. SCG 200 consists of specially selected cements, graded card wearing aggregates and additives supplied in powder form together with a liquid component of blended acrylic copolymers and wetting agents.
The acrylic polymer provides SCG 200 with exceptional adhesion, resiliency flexibility, toughness and durability. In normal use it will resist water pressure up to 7 meter head. The degree of resistance of SCG 200 to water under pressure depends on the coating thickness.
SCG 200 is designed to re-face and even out variations in concrete and masonry surfaces. It effectively protects against concrete decay by providing along lasting barrier to water borne corrosive salts and atmospheric gases.
It provides a seamless flexible waterproof coating suitable for use in water tanks, balcony, wet kitchen, reservoir , concrete roof, retaining wall and toilets.
SCG 100 – WATERPROOFING COATING SYSTEM:
SCG 100 waterproofing is an ecologically harmless water thinnable. One pack, watery, solvent free coating material based on acrylic polymer. SCG 100 – ACRYLIC POLYMER WATERPROOFING Concrete, asbestos cement, masonry per – m2.
SCG 100 waterproofing used for in Swimming Pool, Water Tank, Ground Tank. Especially for concrete roof, toilet, balcony, swimming pool, water tank waterproofing. It can be use on asbestos , aluminium , wood , copper, PVC and masonry surfaces.
SCG 300 WATERPROOFING MEMBRANE:
SCG 300 is an uniquely formulated prefabricated waterproofing membrane with a special multilayer-ed design for superior pliability, tensile strength, work ability and resistance to elements.
The multilayer-ed design consists of a polyester core coated on both sides with modified bitumen. The polyester core gives the membrane high tensile strength. Properly installed, SCG 300 forms an impervious, permanently flexible waterproof blanket which accepts normal structural movement without breaking or cracking.
SCG 300 membranes are ideal for a wide range of waterproofing applications, including reservoirs, basements, tunnels, roof and car parks. SCG 300 may be utilized in exposed and covered applications. We have several types of membrane waterproofing as follow: SELF ADHESIVE MEMBRANE & TORCH ON MEMBRANE WITH GRANULE/ MINERAL.
SCG 50 EPOXY MORTAR:
Epoxy Mortar is a mix between mortar and epoxy as a replacement for cement and water. Epoxy Mortar consist of 3 component i.e. 2 liquid (epoxy + hardener) and 1 powder (silica sand) to be mixed evenly and pour to the hole.
After drying, Epoxy Mortar will become a mortar that is strong enough to endure the vibration from the machineries or other burden on top of the surface, both static and dynamics. Epoxy Mortar is generally used to fill the hole or gap on machineries anchor, pipe hole, concrete structure, and the characteristic is waterproof.
PVC WATERSTOP – SCG 70:
PVC WATERSTOP-SCG 70 used for construction Joints & Expansion Joints of concrete. Typically used for: Floor joints, wall to floor joints, building to floor joints, changes in direction, etc.
Outstanding physical properties, excellent inherent elasticity and resistance to many waterborne chemicals has made it the most widely specified waterstop material & needed. The versatility of PVC has made these waterstops popular with specifiers and engineers.
PVC waterstops are available in several styles and sizes. Choosing the correct waterstop begins with determining whether the joint is moving or non-moving. Typical Applications For PVC Waterstops Include:
- Water and waste water treatment facilities
- Dams, lock, canals, water reservoirs and aqueducts
- Tunnels and culverts
- Primary and secondary containment structures
FLOOR HARDENER – SCG 500:
SCG 500 consists of special hard wearing aggregates selected for their physical properties of abrasion and wear resistance, cement and special additive to improve workability. This combination produces a material which is easy to trowel in the surface of fresh, wet concrete.
SCG 500 provides a highly abrasion resistant surface to fresh concrete floors by the dry shake method which ensures that the hard wearing surface bonds monolithically to the base concrete.
It is ideally suited for all industrial areas subjected to heavy traffic, e.g Power stations, heavy buildings, distillation plants, abattoirs, laboratories, warehouse floors, loading bays, and work
shop. The average consumption is 3 to 7 kg of SCG 500 powder per-m2, the thickness of the surface is about 2 – 3 mm.
Polyurethane sealant is a material containing a component material and packed in 600 ml sizes. Polyurethane sealant normally used to fill the joint at the precast concrete, masonry, concrete joints, etc.
Polyurethane sealant, when dry, will form a strong kind of rubber and elastic and can withstand the bond connection is caused by engine vibrations or other loads. In concrete joints (especially for construction joints) or sparing pipe which is directly affected by water/rain, the polyurethane sealant can be used as waterproof coating to fill a gap/ hole of concrete.
Company Name: SEMESTA CIPTAGRAHA. PT
Taman Kebon Jeruk Blok AA IV No. 12 Jakarta Barat – Indonesia.
Posted Code : 11650
Phone 1: +6221 5857441
Phone 2: +6221 5853295
Mobile Phone: 08161886446
Fax: +6221 5853267
In the construction of buildings, water-resistant material ( Waterproofing) is becoming a very important necessity. Waterproofing serves as a concrete structure coating to protect the building from leaks that can be caused by hydrostatic pressure of water, the weather, the natural movement of water on the surface of concrete, in between the concretes joint, and in between the concrete with other materials.
A water-resistant material is required in almost every constructions, for example: hotels, apartments, houses and other buildings that are particularly made of concrete.
The selection of suitable water-resistant material and appropriate working methods is very important to note. Error in Waterproofing material selection will cause a variety of leakage problems. Cost for these improvements may exceed 300% of the cost of initial installation. Losses resulting from damage to equipment and supplies within the building can mount to a significant amount. Please also consider the time waste to repair the building.
Purpose & Objectives
Considering the importance waterproofing in the development of buildings, PT. Semesta Ciptagraha, since 1992, has focused to become a specialist in the field of Waterproofing. We are committed to providing solutions and innovation in assisting our clients to prevent and deal with the problem of leakage.
In addition to producing some waterproofing material and becoming a Supplier of waterproofing products, PT Semesta Ciptagraha also act as Applicator. Our specialists are always ready to provide guidance in choosing the appropriate Waterproofing material to the case at hand and its technical applications. Our company also provides waterproofing installation services with a warranty. We do this because we put quality and customer satisfaction above everything else.
Our company is ready to help you in tackling the problem of leakage in the building, from the material selection to application and / or installation supervision services. The implementation of these jobs are supported by our specialized personnel who are experienced in both government and private buildings.